Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
67910
1.REMOVE DOOR SCUFF PLATE ASSEMBLY RH
62111C
2.REMOVE COWL SIDE TRIM BOARD RH
55317A
3.REMOVE INSTRUMENT SIDE PANEL RH
55607
4.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55461A
5.REMOVE INSTRUMENT PANEL ORNAMENT
55550
6.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
86681C
7.REMOVE ANTENNA DIVIDER (w/ ANTENNA DIVIDER)
85940
8.REMOVE WINDSHIELD WIPER RELAY ASSEMBLY
| *A | w/o Antenna Divider |
| *B | w/ Antenna Divider |
|
Bolt |
|
Connector |
Remove the bolt and detach the 2 guides.
Disconnect the connector and remove the windshield wiper relay assembly.