Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Power Seat) › from 2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261115 FRONT SEAT ASSEMBLY(for Power Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  REASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)

Hide 82168 2.INSTALL NO. 2 SEAT WIRE

a.

for Driver Side:

w/o Climate Control Seat System:

i.

Attach the 2 clamps to install the No. 2 seat wire.


ii.

Connect the 2 connectors.



b.

for Driver Side:

w/ Climate Control Seat System:

i.

Attach the 3 clamps to install the No. 2 seat wire.


ii.

Connect the 2 connectors.



c.

for Front Passenger Side:

i.

Attach the 2 clamps to install the seat wire.


ii.

Connect the connector.



Hide 85866C 3.INSTALL SEATBACK CLIMATE CONTROL DUCT LH (w/ Climate Control Seat System)

a.

Attach the 2 claws to install the seatback climate control duct LH.


Hide 85867A 4.INSTALL SEATBACK CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)

a.

Install the seatback climate control blower LH with the 4 screws.


b.

Connect the connector.


Hide 71552S 5.INSTALL SEPARATE TYPE FRONT SEATBACK PAD

a.

Install the separate type front seatback pad.


Hide 87510N 6.INSTALL FRONT SEATBACK HEATER ASSEMBLY LH (w/ Seat Heater System)

Hide 71074S 7.INSTALL SEPARATE TYPE FRONT SEATBACK COVER

a.

Set the separate type front seatback cover in place.


b.
B239206C06
2.323,0.323 2.156,0.323 2.156,0.323 1.656,1.719 false 2.365,0.25 2.594,0.448 0.229,0.198 10 false *a
*a Hog Ring Pliers


Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 13 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.




c.

Attach the 4 claws to install the 2 front seat headrest supports.


d.

w/ Front Seat Side Airbag:

i.

Connect the seatback cover bracket to the separate type front seatback pad.

B617503C01
0.594,0.26 0.969,0.5 0.375,0.24 12 false *A 3.958,0.281 4.333,0.521 0.375,0.24 12 false *B
*A for Type A *B for Type B



ii.

Install the seatback cover bracket to the seat frame with the nut.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)

NOTICE:

After the seatback trim cover is assembled, make sure the side airbag strap is not twisted.




e.

w/o Seatback Board:

i.

Close the 2 fasteners, and then close the separate type front seatback cover.

B242233C07
0.875,0.052 1.625,0.625 0.75,0.573 12 false *A 4.281,0.052 4.729,0.417 0.448,0.365 12 false *B
*A for Cloth Seat *B for Leather Seat



ii.
B239193C05
2.354,0.177 2.188,0.177 2.188,0.177 1.688,1.573 false 2.396,0.104 2.625,0.302 0.229,0.198 10 false *a
*a Hog Ring Pliers


Using hog ring pliers, install 3 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.





f.

w/ Seatback Board:

i.
B247942C05
2.229,0.469 2.083,0.469 2.083,0.469 1.656,1.677 false 2.26,0.396 2.49,0.594 0.229,0.198 10 false *a
*a Hog Ring Pliers


Using hog ring pliers, install 5 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seatback cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.




ii.

Attach the hooks.



Hide 71876A 8.INSTALL RECLINING ADJUSTER INSIDE COVER LH

a.

Attach the guide to install the reclining adjuster inside cover LH.


Hide 71875A 9.INSTALL RECLINING ADJUSTER INSIDE COVER RH

a.

Attach the guide to install the reclining adjuster inside cover RH.


Hide 82192 10.INSTALL FRONT SEAT WIRE LH

a.

Install the front seat wire LH.


Hide 85860B 11.INSTALL SEAT CUSHION CLIMATE CONTROL BLOWER ASSEMBLY LH (w/ Climate Control Seat System)

a.
B357447

Attach the 2 guides to install the seat cushion climate control blower as shown in the illustration.


b.

Install the seat cushion climate control bracket with the 2 screws.


Hide 85866A 12.INSTALL SEAT CUSHION CLIMATE CONTROL DUCT LH (w/ Climate Control Seat System)

a.

Attach the 2 claws and 2 clamps to install the seat cushion climate control duct.


Hide 87501B 13.INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY LH (w/ Seat Heater System)

Hide 71537D 14.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH

B239189

a.

Move the front seat cushion edge protector LH in the direction of the arrow to attach the hook and install the front seat cushion edge protector LH.


b.

Install the screw.


Hide 71537C 15.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH

HINT:

Use the same procedure described for the LH side.


Hide 71874 16.INSTALL FRONT SEAT LOWER CUSHION SHIELD LH

a.

Attach the hook and clip to install the front seat lower cushion shield LH.


b.

Install the screw.


Hide 71873 17.INSTALL FRONT SEAT LOWER CUSHION SHIELD RH

a.

Attach the hook and clip to install the front seat lower cushion shield RH.


b.

Install the screw.


Hide 71876 18.INSTALL RECLINING ADJUSTER INSIDE COVER LH

a.

Attach the claw and guide to install the reclining adjuster inside cover LH.


Hide 87510L 19.INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System)

Hide 71072S 20.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

a.

Set the separate type front seat cushion cover in place.


b.
B239183C07
2.333,0.292 2.177,0.292 2.177,0.292 1.677,1.688 false 2.385,0.219 2.615,0.417 0.229,0.198 10 false *a
*a Hog Ring Pliers


Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 15 new hog rings.

NOTICE:
·

Be careful not to damage the separate type front seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.




c.
B372265C06
2.01,2.479 1.875,2.479 1.875,2.479 1.833,2.833 false 2.052,2.396 2.26,2.594 0.208,0.198 10 false *a
*a Hog Ring Pliers


Type A:

i.

Using hog ring pliers, connect the straps with new hog rings.



d.
B372267C08
2.281,1.5 2.979,1.5 true 2.979,1.406 3.177,1.594 0.198,0.188 10 false *a
*a Tack Pin


Type B:

i.

Connect the straps with new tack pins.



Hide 21.INSTALL SEAT CUSHION COVER WITH PAD

a.

Install the seat cushion cover with pad.


b.

for Front Passenger Side:

Attach the claw to connect the connector.


c.

w/ Seat Heater System:

Connect the seat heater connector and attach the 3 wire harness clamps.


d.

Attach the hooks.


Hide 71149A 22.INSTALL FRONT SEAT LEG COVER LH

B239172

a.

Move the front seat leg cover LH in the direction of the arrow to install the front seat leg cover LH.


b.

Attach the 2 claws.


Hide 71849 23.INSTALL SEAT ADJUSTER COVER CAP

a.

Install the 2 seat adjuster caps.


Hide 24.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

a.

Install the separate type front seatback assembly with the 4 bolts.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


b.

w/ Front Seat Side Airbag:

i.

Connect the airbag wire harness.


ii.

Attach the fastening tape to close the cover.


iii.

Attach the hook and 3 airbag wire harness clamps.


iv.

Attach the claw to connect the airbag connector.



c.

Attach the 2 hooks.


d.

Attach the clamp to connect the No. 2 seat wire.


e.

w/ Seat Heater System:

Connect the seat heater connector and attach the wire harness clamp.


f.

w/o Seatback Board:

i.

Connect the rubber band.



Hide 73240 25.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

Hide 71862 26.INSTALL FRONT SEAT INNER CUSHION SHIELD LH

B239168

a.

Attach the 3 claws to install the front seat inner cushion shield LH.


Hide 71861 27.INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Side)

a.

Attach the 4 claws to install the front seat inner cushion shield RH.


Hide 71868A 28.INSTALL FRONT SEAT NO. 1 INNER CUSHION SHIELD LH

B239541

a.

Attach the 2 claws to install the front seat No. 1 inner cushion shield LH.


Hide 84920 29.INSTALL LUMBAR SWITCH ASSEMBLY (for Driver Side)

Hide 84922C 30.INSTALL FRONT POWER SEAT SWITCH LH

a.

w/ Seat Memory System:

Connect the 2 power seat switch connectors.


b.

w/o Seat Memory System:

Connect the power seat switch connector.


c.

Install the front power seat switch LH with 3 screws.


Hide 71812D 31.INSTALL FRONT SEAT CUSHION SHIELD LH

a.

Attach the 3 wire harness clamps and connect the seat wire connector.


b.

Attach the 3 claws to close the wire harness cover.


c.

Remove the clip attached to the separate type front seat cushion spring assembly and install it to the front seat cushion shield LH.

B239535


d.

Attach the 2 clips, 3 claws and guide.


e.

Attach the guide of the front seat No. 1 inner cushion shield LH and install the screw.


f.

Connect the lifter motor connector.


Hide 84921A 32.INSTALL RECLINING POWER SEAT SWITCH KNOB

a.
B239533

Attach the 2 claws to install the reclining power seat switch knob.


Hide 84921B 33.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

B239531

a.

Attach the 2 claws to install the slide and vertical power seat switch knob.


Hide 71706B 34.INSTALL FRONT SEATBACK BOARD CLIP (w/ Seatback Board)

a.
B341418

Install 2 new front seatback board clips to front seatback board sub-assembly LH.


Hide 71706 35.INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH (w/ Seatback Board)

a.
B248645

Attach the 2 guides and 2 claws of the front seatback board clip to install the front seatback board sub-assembly LH.


b.

Attach the 2 hooks to connect the 2 rubber bands.