2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

Panel Switches do not Function

Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011

INSPECTION PROCEDURE


1. CHECK PANEL SWITCH
  1. Check for foreign matter around the switches that might prevent operation.

    OK:
    No foreign matter is found.



NG
REMOVE ANY FOREIGN MATTER FOUND
OK


2. CHECK PANEL SWITCH (OPERATION CHECK)

  1. E176522
    Enter the "Panel & Steering Switch Check Mode" screen. Refer to Check Panel & Steering Switch in Operation Check (Click here).

  1. Operate the abnormal switch and check if the switch name and status are correctly displayed.

    OK:
    The switch name and status are correctly displayed as operated.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY (Click here)


← Display does not Dim when Light Control Switch is Turned ON (Sep 2011 – Dec 2011)Touch Panel Switch does not Function (Sep 2011 – Dec 2011) →