2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

Panel Switches do not Function

Circuit diagnosis · Vehicles built from Jan 2012

INSPECTION PROCEDURE


1. CHECK PANEL SWITCH
  1. Check for foreign matter around the switches that might prevent operation.

    OK:
    No foreign matter is found.



NG
REMOVE ANY FOREIGN MATTER FOUND
OK


2. CHECK PANEL SWITCH (OPERATION CHECK)
E225786E03
  1. Enter the "Panel & Steering Switch Check Mode" screen. Refer to Check Panel & Steering Switch in Operation Check (Click here).

  1. Operate the abnormal switch and check if the switch name is correctly displayed.

    OK:
    The switch name is correctly displayed as operated.

    Text in Illustration 
    *a
    Name of the pushed switch is displayed



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (Click here)


← Display does not Dim when Light Control Switch is Turned ON (from Jan 2012)Touch Panel Switch does not Function (from Jan 2012) →