2011-2013 Land Cruiser · Service Manual Steering

C15B4/71 ECU Malfunction

Diagnostic trouble codes · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

DESCRIPTION

If the steering control ECU detects an internal malfunction, it will turn the master warning light on, store DTC C15B4/71, and stop VGRS operation.
DTC Code
DTC Detection Condition
Trouble Area
C15B4/71
The steering control ECU detects an internal malfunction.
Steering control ECU

INSPECTION PROCEDURE


1. CHECK MASTER WARNING LIGHT
  1. Check the conditions under which the master warning light comes on.

    Result 
    Result
    Result
    Proceed to
    The engine stalled, battery voltage is too low, or the steering control ECU connector is disconnected.
    A
    Conditions other than above (for LHD).
    B
    Conditions other than above (for RHD).
    C



B
REPLACE STEERING CONTROL ECU (Click here)

C
REPLACE STEERING CONTROL ECU (Click here)
A


2. CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


3. PERFORM VGRS SYSTEM CALIBRATION
  1. Perform VGRS system calibration (Click here).


NEXT


4. CHECK DTC
  1. Check for DTCs (Click here).

    Result 
    Result
    Proceed to
    DTC is not output
    A
    C15B4/71 is output (for LHD)
    B
    C15B4/71 is output (for RHD)
    C



B
REPLACE STEERING CONTROL ECU (Click here)

C
REPLACE STEERING CONTROL ECU (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)


← C15B1/71 ECU Malfunction (+ C15B2/72, C15B3/73) (from Sep 2011)C15B4/71 ECU Malfunction (from Jan 2012) →