C15B4/71 ECU Malfunction
Diagnostic trouble codes · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
If the steering control ECU detects an internal malfunction, it will turn the master warning light on, store DTC C15B4/71, and stop VGRS operation.| DTC Code |
DTC Detection Condition |
Trouble Area |
| C15B4/71 |
The steering control ECU detects an internal malfunction. |
Steering control ECU |
INSPECTION PROCEDURE
| 1. CHECK MASTER WARNING LIGHT |
Check the conditions under which the master warning light comes on.
Result Result
ResultProceed to
The engine stalled, battery voltage is too low, or the steering control ECU connector is disconnected.
A
Conditions other than above (for LHD).
B
Conditions other than above (for RHD).
C
|
|
||||
|
|
||||
| A | |
| 2. CLEAR DTC |
Clear the DTCs (Click here).
| NEXT | |
| 3. PERFORM VGRS SYSTEM CALIBRATION |
Perform VGRS system calibration (Click here).
| NEXT | |
| 4. CHECK DTC |
Check for DTCs (Click here).
Result Result
Proceed to
DTC is not output
A
C15B4/71 is output (for LHD)
B
C15B4/71 is output (for RHD)
C
|
|
||||
|
|
||||
| A | ||
| ||
