B2415 Vehicle Speed Sensor Malfunction
Diagnostic trouble codes · Vehicles built from Jan 2012
DESCRIPTION
The headlight swivel ECU receives signals indicating the front wheel speed from the skid control ECU using CAN communication.| DTC Code |
DTC Detection Condition |
Trouble Area |
| B2415 |
Malfunction in the vehicle speed sensor. |
|
WIRING DIAGRAM


INSPECTION PROCEDURE
- NOTICE:
- First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before troubleshooting this DTC.
- After replacing the headlight swivel ECU, initialization of the ECU is necessary (except w/ Dynamic Headlight Auto Leveling) (Click here).
- First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before troubleshooting this DTC.
| 1. CHECK FOR DTC |
Clear the DTCs (Click here).
Check for DTCs (Click here).
- OK:
- DTC B2415 output does not occur.
|
|
||||
| OK | ||
| ||
| 2. CHECK VEHICLE TYPE |
Check the vehicle type.
Result Result
Proceed to
w/ VSC
A
w/o VSC
B
|
|
||||
| A | |
| 3. CHECK FOR DTC (VEHICLE STABILITY CONTROL SYSTEM) |
Clear the DTCs (Click here).
Check for DTCs (Click here).
- OK:
- DTC output does not occur.
Result Result
Proceed to
OK (for LHD)
A
OK (for RHD)
B
NG
C
|
|
||||
|
|
||||
| A | ||
| ||
| 4. CHECK FOR DTC (ANTI-LOCK BRAKE SYSTEM) |
Clear the DTCs (Click here).
Check for DTCs (Click here).
- OK:
- DTC output does not occur.
|
|
||||
| OK | ||
| ||
