2011-2013 Land Cruiser · Service Manual Drivetrain

REMOVAL

Removal / installation · Vehicles built from Sep 2011


1. REMOVE FRONT PROPELLER SHAFT ASSEMBLY
  1. Remove the front propeller shaft (Click here).


2. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
  1. Remove the front drive shaft (Click here).


3. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

HINT:
Use the same procedure as the LH side.


4. REMOVE FRONT SUSPENSION REBOUND STOPPER SUB-ASSEMBLY LH

  1. C174597
    Remove the 3 bolts and suspension rebound stopper LH.


5. REMOVE FRONT SUSPENSION REBOUND STOPPER SUB-ASSEMBLY RH

  1. C174598
    Remove the 3 bolts and suspension rebound stopper RH.


6. REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY
  1. Disconnect the breather tube from the front differential union.

  1. Support the front differential with a jack.

  1. C171951E01
    Remove bolts A and B, and the nut and front differential support assembly.

  1. Remove bolts C and D.

  1. Slowly lower the jack, and remove the front differential carrier.

  1. Remove bolts E and F, and the differential support assembly.

← COMPONENTS (from Sep 2011)DISASSEMBLY (from Sep 2011) →