INSTALLATION
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. INSTALL SHROUD BLOWER ASSEMBLY |
![]() ![]() |
Install the shroud blower with the bolt.
- Torque:
- 9.8 N*m{ 100 kgf*cm , 7 ft.*lbf }
Connect the connector.
| 2. INSTALL FRONT BUMPER COVER |
for Standard:
(Click here)
w/ Winch:
(Click here)
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


