REMOVAL
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
REMOVE FRONT FENDER APRON TRIM PACKING A
|
 |
- Remove the 3 clips and front fender apron trim packing A.
| 2.
REMOVE FRONT FENDER APRON TRIM PACKING C
|
 |
- Remove the 4 clips and front fender apron trim packing C.
| 3.
REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
|
 |
- Remove the 10 bolts and No. 1 engine under cover sub-assembly.
| 4.
REMOVE NO. 2 ENGINE UNDER COVER
|
 |
- Remove the 2 bolts and No. 2 engine under cover.
| 5.
REMOVE FRONT BUMPER COVER (w/ Air Cooled Transmission Oil Cooler) |
 |
for Standard:
(Click here)
w/ Winch:
(Click here)
| 6.
DISCONNECT TRANSMISSION OIL COOLER HOSE |
 |
Disconnect the 2 transmission oil cooler hoses.
| 7.
DISCONNECT INLET NO. 1 OIL COOLER HOSE AND OUTLET NO. 1 OIL COOLER HOSE |
 |


Text in Illustration
*A
|
for 1VD-FTV
|
*B
|
for 1UR-FE, 3UR-FE
|
Detach the claw to open the flexible hose clamp.
Disconnect the inlet and outlet oil cooler hoses.
| 8.
DISCONNECT INLET NO. 1 OIL COOLER HOSE AND OUTLET NO. 1 OIL COOLER HOSE (w/o Air Cooled Transmission Oil Cooler) |
 |
- Disconnect the inlet and outlet oil cooler hoses.
| 9.
DISCONNECT INLET NO. 2 OIL COOLER HOSE AND INLET NO. 3 OIL COOLER HOSE |
 |


Text in Illustration
*A
|
for 1VD-FTV
|
*B
|
for 1UR-FE, 3UR-FE
|
Disconnect the 2 inlet oil cooler hoses.
| 10.
DISCONNECT INLET NO. 2 OIL COOLER HOSE AND INLET NO. 3 OIL COOLER HOSE (w/o Air Cooled Transmission Oil Cooler) |
 |
- Disconnect the 2 inlet oil cooler hoses.
| 11.
DISCONNECT INLET NO. 4 OIL COOLER HOSE |
 |
| 12.
REMOVE OIL COOLER TUBE |
 |


Text in Illustration
*A
|
for 1VD-FTV
|
*B
|
for 1UR-FE, 3UR-FE
|
Remove the 2 bolts and oil cooler tube.
| 13.
REMOVE OIL COOLER TUBE (w/o Air Cooled Transmission Oil Cooler) |
 |
- Remove the 2 bolts and oil cooler tube.
| 14.
REMOVE TRANSMISSION OIL COOLER AIR DUCT |
 |
Remove the 4 bolts and transmission oil cooler air duct.
| 15.
REMOVE OIL COOLER ASSEMBLY |
 |
Remove the 4 bolts and oil cooler.
- Remove the 5 bolts and rear transmission oil cooler air duct.
- Disconnect the oil cooler inlet hose and outlet hose and remove the tube.