B1497 Communication Malfunction (Bus Ic)
Diagnostic trouble codes · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
The air conditioning harness assembly connects the air conditioning amplifier assembly and servo motors. The air conditioning amplifier assembly supplies power and sends operation instructions to each servo motor through the air conditioning harness assembly. Each servo motor sends damper position information to the air conditioning amplifier assembly.| DTC Code |
DTC Detection Condition |
Trouble Area |
| B1497 |
An error or open in the communication line. |
|
WIRING DIAGRAM


INSPECTION PROCEDURE
- NOTICE:
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
| 1. CHECK FOR DTC |
Clear the DTC (Click here).
Check for the DTC (Click here).
Result Result
Proceed to
DTC B1497 is not output
A
DTC B1497 is output
B
|
|
||||
| A | ||
| ||
| 2. CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - BATTERY) |
Disconnect the E81 air conditioning amplifier assembly connector.

Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection
Condition
Specified Condition
E81-21 (+B1) - Body ground
Always
11 to 14 V
|
|
||||
| OK | |
| 3. PERFORM ACTIVE TEST USING INTELLIGENT TESTER |
Select the Active Test, use the intelligent tester to generate a control command, and then check that items operate (Click here).
Air Conditioner Tester Display
Test Part
Control Range
Diagnostic Note
Air Mix Servo Targ Pulse(D)
No. 1 air conditioning radiator damper servo sub-assembly (air mix damper servo)
Min.: 0, Max.: 255
-
Air Inlet Damper Targ Pulse
No. 1 blower damper servo sub-assembly
Min.: 0, Max.: 255
-
Air Outlet Servo Pulse(D)
No. 1 air conditioning radiator damper servo sub-assembly (mode damper servo)
Min.: 0, Max.: 255
-
Cool Air Bypass Pulse
No. 1 air conditioning radiator damper servo sub-assembly (cooler bypass damper servo)
Min.: 0, Max.: 255
-
- OK:
- Arm of the damper servo motor selected in the Active Test moves smoothly.
According to the test result, proceed to the next step.
Result Result
Proceed to
One of the damper servo motors is malfunctioning
A
All of the damper servo motors are malfunctioning
B
|
|
||||
| A | |
| 4. SYSTEM CHECK |
According to the test result, proceed to the next step.
Result Result
Proceed to
Only the No. 1 air conditioning radiator damper servo sub-assembly (air mix damper servo) is malfunctioning
A
Only the No. 1 blower damper servo sub-assembly is malfunctioning
B
Only the No. 1 air conditioning radiator damper servo sub-assembly (mode damper servo) is malfunctioning
C
Only the No. 1 air conditioning radiator damper servo sub-assembly (cooler bypass damper servo) is malfunctioning
D
|
|
||||
|
|
||||
|
|
||||
| A | |
| 5. REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR MIX DAMPER SERVO) |
Temporarily replace the No. 1 air conditioning radiator damper servo sub-assembly (air mix damper servo).
- for LHD: Click here.
- for RHD: Click here.
- HINT:
- Since the No. 1 air conditioning radiator damper servo sub-assembly (air mix damper servo) cannot be inspected while it is removed from the vehicle, replace the No. 1 air conditioning radiator damper servo sub-assembly (air mix damper servo) with a new or normally functioning one and check that the condition returns to normal.
- for LHD: Click here.
Clear the DTC (Click here).
Check for the DTC (Click here).
Result Result
Proceed to
DTC B1497 is not output
A
DTC B1497 is output
B
|
|
||||
| A | ||
| ||
| 6. REPLACE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY |
Temporarily replace the No. 1 blower damper servo sub-assembly (Click here).
- HINT:
- Since the No. 1 blower damper servo sub-assembly cannot be inspected while it is removed from the vehicle, replace the No. 1 blower damper servo sub-assembly with a new or normally functioning one and check that the condition returns to normal.
Clear the DTC (Click here).
Check for the DTC (Click here).
Result Result
Proceed to
DTC B1497 is not output
A
DTC B1497 is output
B
|
|
||||
| A | ||
| ||
| 7. REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MODE DAMPER SERVO) |
Temporarily replace the No. 1 air conditioning radiator damper servo sub-assembly (mode damper servo).
- for LHD: Click here.
- for RHD: Click here.
- HINT:
- Since the No. 1 air conditioning radiator damper servo sub-assembly (mode damper servo) cannot be inspected while it is removed from the vehicle, replace the No. 1 air conditioning radiator damper servo sub-assembly (mode damper servo) with a new or normally functioning one and check that the condition returns to normal.
- for LHD: Click here.
Clear the DTC (Click here).
Check for the DTC (Click here).
Result Result
Proceed to
DTC B1497 is not output
A
DTC B1497 is output
B
|
|
||||
| A | ||
| ||
| 8. REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (COOLER BYPASS DAMPER SERVO) |
Temporarily replace the No. 1 air conditioning radiator damper servo sub-assembly (cooler bypass damper servo).
- for LHD: Click here.
- for RHD: Click here.
- HINT:
- Since the No. 1 air conditioning radiator damper servo sub-assembly (cooler bypass damper servo) cannot be inspected while it is removed from the vehicle, replace the No. 1 air conditioning radiator damper servo sub-assembly (cooler bypass damper servo) with a new or normally functioning one and check that the condition returns to normal.
- for LHD: Click here.
Clear the DTC (Click here).
Check for the DTC (Click here).
Result Result
Proceed to
DTC B1497 is not output
A
DTC B1497 is output
B
|
|
||||
| A | ||
| ||
| 9. REPLACE AIR CONDITIONING HARNESS ASSEMBLY |
Temporarily replace the air conditioning harness assembly.
- for LHD: Click here.
- for RHD: Click here.
- HINT:
- Since the air conditioning harness assembly cannot be inspected while it is removed from the vehicle, replace the air conditioning harness assembly with a new or normally functioning one and check that the condition returns to normal.
- for LHD: Click here.
Clear the DTC (Click here).
Check for the DTC (Click here).
Result Result
Proceed to
DTC B1497 is not output
A
DTC B1497 is output
B
|
|
||||
| A | ||
| ||
