2011-2013 Land Cruiser · Service Manual Drivetrain

REMOVAL

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. DRAIN TRANSFER OIL

  1. C173746
    except 1GR-FE:
    Remove the 2 bolts and transfer dynamic damper.

  1. C171487
    Remove the 4 bolts and transfer heat insulator.

  1. C173748
    Remove the 7 bolts and lower transfer case protector.

  1. C172047
    Remove the filler plug and gasket.

  1. C172046
    Remove the drain plug and gasket, and drain the transfer oil.


2. REMOVE AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY (for A750F)
(Click here)

3. REMOVE AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY (for AB60F)
  1. for 1VD-FTV:
    (Click here)

  1. for 1UR-FE:
    (Click here)

  1. for 3UR-FE:
    (Click here)


4. REMOVE MANUAL TRANSMISSION WITH TRANSFER ASSEMBLY (for H150F)
(Click here)

5. REMOVE TRANSFER ASSEMBLY

  1. C174591E01
    Remove the 8 transfer adaptor rear mounting bolts.

  1. Pull the transfer straight up and remove it from the transmission.

    NOTICE:
    Take care not to damage the adaptor oil seal with the transfer input shaft spline.

← REMOVAL (Sep 2011 – Dec 2011)DISASSEMBLY (from Sep 2011) →