2011-2013 Land Cruiser · Service Manual Steering

DIAGNOSTIC TROUBLE CODE CHART

Diagnostic trouble codes · Vehicles built from Jan 2012

HINT:
If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.

Power Steering System 
DTC Code
Detection Item
Return-to-normal
See page
C1541
Vehicle Speed Signal Malfunction
After normal confirmation
Click here
C1544
High Engine Revolution Signal
After normal confirmation
Click here
C15F0
VFC Solenoid Circuit
Engine switch on (IG) again
Click here
C15F1
Steering Angle Sensor Circuit
After normal confirmation
Click here
C15F2
VGRS System Malfunction
After normal confirmation
Click here
U0100
Lost Communication with ECM / PCM "A"
After CAN communication system returns to normal condition or engine switch turned on (IG) again
Click here
U0126
Lost Communication with Steering Angle Sensor Module
After CAN communication system returns to normal condition or engine switch turned on (IG) again
Click here
U0129
Lost Communication with Brake System Control Module
After CAN communication system returns to normal condition or engine switch turned on (IG) again
Click here
U0130
Lost Communication with Steering Effort Control Module
After CAN communication system returns to normal condition or engine switch turned on (IG) again
Click here
← DATA LIST / ACTIVE TEST (from Jan 2012)ON-VEHICLE INSPECTION (from Jan 2012) →