C1AE6 Rear Left Sensor Malfunction
Diagnostic trouble codes · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
The No. 1 ultrasonic sensor (RL sensor) is installed on the rear bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (RL sensor). If the No. 1 ultrasonic sensor (RL sensor) has an open circuit or other malfunction, it will not function normally.| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1AE6 |
A malfunction of the No. 1 ultrasonic sensor (RL sensor). |
|
- *1: w/ Side Monitor System
- *2: w/o Side Monitor System
INSPECTION PROCEDURE
- NOTICE:
- If the DTC is output after repairs, turn the engine switch on (IG) and move the shift lever to R. Then clear the DTC.
| 1. CHECK FOR DTC |
Clear the DTCs (Click here).
Check for DTCs (Click here).
- OK:
- DTC C1AE6 is not output.
|
|
||||
| OK | ||
| ||
| 2. REPLACE NO. 1 ULTRASONIC SENSOR (RL SENSOR) |
Replace the No. 1 ultrasonic sensor (RL sensor) with a normally functioning one (Click here).
| NEXT | |
| 3. CHECK FOR DTC |
Clear the DTCs (Click here).
Check for DTCs (Click here).
Result Result
Proceed to
DTC C1AE6 is not output
A
DTC C1AE6 is output (w/ Side Monitor System)
B
DTC C1AE6 is output (w/o Side Monitor System)
C
|
|
||||
|
|
||||
| A | ||
| ||
