2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built from Jan 2012


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH
(Click here)

4. REMOVE STARTER COVER

  1. A175317
    Remove the 3 bolts and starter cover.


5. REMOVE STARTER ASSEMBLY

  1. A260965
    Disconnect the starter connector.

  1. Remove the nut and disconnect the starter wire.

  1. A260966
    Remove the 2 bolts and starter.

  1. A162758
    Remove the flywheel housing side cover.

← COMPONENTS (from Jan 2012)DISASSEMBLY (from Jan 2012) →