B1445/45 Passenger Side Cool Air Bypass Damper Control
Diagnostic trouble codes · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
The cool air bypass damper servo motor sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the cool air bypass damper to any position. As a result, when the air conditioner is operating, the temperature of the air blowing toward the head area is controlled.- HINT:
- Confirm that no mechanical problem is present because this trouble code can be output when either a damper link or damper is mechanically locked.
| DTC Code |
DTC Detection Condition |
Trouble Area |
| B1445/45 |
The cool air bypass damper position does not change even if the air conditioning amplifier assembly operates the cool air bypass damper servo motor. |
|
WIRING DIAGRAM




INSPECTION PROCEDURE
| 1. READ VALUE USING INTELLIGENT TESTER (COOL AIR BYPASS DAMPER SERVO MOTOR) |
Use the Data List to check if the servo motor is functioning properly.
Air Conditioner Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
Cool Air Bypass Pulse
Cool air bypass damper servo motor target pulse /
Min.: 6, Max.: 57
Shut: 6 (pulse)
Open: 57 (pulse)
-
- OK:
- The display is as specified in the normal condition.
|
|
||||
| OK | ||
| ||
| 2. CHECK COOL AIR BYPASS DAMPER SERVO MOTOR (OPERATION) |
for LHD:
Replace the cool air bypass damper servo motor (Click here).
for RHD:
Replace the cool air bypass damper servo motor (Click here).
- HINT:
- Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.
| NEXT | |
| 3. CHECK FOR DTC |
Clear the DTCs (Click here).
Check for DTCs (Click here).
- OK:
- DTC B1445 is not output.
Result Result
Proceed to
OK (for LHD)
A
OK (for RHD)
B
NG (for LHD)
C
NG (for RHD)
D
|
|
||||
|
|
||||
|
|
||||
| A | ||
| ||
