2011-2013 Land Cruiser · Service Manual Vehicle Interior

Speedometer Malfunction

Circuit diagnosis · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

DESCRIPTION

The combination meter receives vehicle speed signals from the skid control ECU via the CAN line. The vehicle speed sensor detects the voltage that varies according to the vehicle speed. The skid control ECU supplies power to the vehicle speed sensor. The skid control ECU detects vehicle speed signals based on the pulses of the voltage.

WIRING DIAGRAM

E140490E14

INSPECTION PROCEDURE


1. CHECK CAN COMMUNICATION SYSTEM
  1. Check for DTCs (Click here).

    Result 
    Result
    Proceed to
    CAN communication DTC is not output
    A
    CAN communication system (for LHD) DTC is output
    B
    CAN communication system (for RHD) DTC is output
    C



B
Go to CAN COMMUNICATION SYSTEM (Click here)

C
Go to CAN COMMUNICATION SYSTEM (Click here)
A


2. CHECK ANTI-LOCK BRAKE SYSTEM (VEHICLE SPEED)
  1. Check for DTCs (Click here).



NG
Go to DIAGNOSTIC TROUBLE CODE CHART (Click here)
OK


3. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (SPEEDOMETER)
  1. Operate the intelligent tester according to the display and select Active Test (Click here).

    Combination Meter 
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    Speed Meter Operation
    Speedometer
    0, 40, 80, 120, 160, 200, 240 or 280
    Perform the test with the vehicle stopped and engine idling.

    HINT:
    1. Make sure that the vehicle is stopped and the engine is idling. The doors will be locked automatically when performing the speedometer Active Test. This is a normal function.
    2. The displayed value has the same units (km/h, mph) as the main scale of the vehicle speedometer.
    3. The needle position should be within the acceptable tolerance.

      OK:
      Needle indication is normal.

Result 
Result
Proceed to
OK
A
NG (w/ Multi-information Display)
B
NG (w/o Multi-information Display)
C


B
REPLACE COMBINATION METER ASSEMBLY (Click here)

C
REPLACE COMBINATION METER ASSEMBLY (Click here)
A


4. READ VALUE USING INTELLIGENT TESTER (VEHICLE SPEED)
  1. Operate the intelligent tester according to the display and select Data List (Click here).

    Combination Meter 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    Vehicle Speed meter
    Vehicle speed/Min.: 0 (0), Max.: 255 (158)
    Almost same as actual speed (when driving)
    Unit: km/h (mph)

    OK:
    Vehicle speed displayed on the intelligent tester is almost the same as actual vehicle speed measured using speedometer tester (calibrated chassis dynamometer).

    Result 
    Result
    Proceed to
    NG
    A
    OK (w/ Multi-information Display)
    B
    OK (w/o Multi-information Display)
    C



B
REPLACE COMBINATION METER ASSEMBLY (Click here)

C
REPLACE COMBINATION METER ASSEMBLY (Click here)
A


5. READ VALUE USING INTELLIGENT TESTER (WHEEL SPEED SENSOR)
  1. Operate the intelligent tester according to the display and select Data List (Click here).

    ABS/VSC/TRAC 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    FR Wheel Speed
    Wheel speed sensor FR reading/Min.: 0 (0), Max.: 326 (202)
    Actual wheel speed
    A similar speed is indicated on the speedometer.
    FL Wheel Speed
    Wheel speed sensor FL reading/Min.: 0 (0), Max.: 326 (202)
    Actual wheel speed
    A similar speed is indicated on the speedometer.
    RR Wheel Speed
    Wheel speed sensor RR reading/Min.: 0 (0), Max.: 326 (202)
    Actual wheel speed
    A similar speed is indicated on the speedometer.
    RL Wheel Speed
    Wheel speed sensor RL reading/Min.: 0 (0), Max.: 326 (202)
    Actual wheel speed
    A similar speed is indicated on the speedometer.

    OK:
    Vehicle speed displayed on the intelligent tester is almost the same as actual vehicle speed measured using speedometer tester (calibrated chassis dynamometer).

    Result 
    Result
    Proceed to
    NG (for LHD)
    A
    NG (for RHD)
    B
    OK (w/ Multi-information Display)
    C
    OK (w/o Multi-information Display)
    D



B
REPLACE HYDRAULIC BRAKE BOOSTER ASSEMBLY (Click here)

C
REPLACE COMBINATION METER ASSEMBLY (Click here)

D
REPLACE COMBINATION METER ASSEMBLY (Click here)
A

REPLACE HYDRAULIC BRAKE BOOSTER ASSEMBLY (Click here)


← Speedometer Malfunction (Sep 2011 – Dec 2011)Tachometer Malfunction (Sep 2011 – Dec 2011) →