Speedometer Malfunction
Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
The combination meter receives vehicle speed signals from the skid control ECU via the CAN line. The vehicle speed sensor detects the voltage that varies according to the vehicle speed. The skid control ECU supplies power to the vehicle speed sensor. The skid control ECU detects vehicle speed signals based on the pulses of the voltage.WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK CAN COMMUNICATION SYSTEM |
Check for DTCs (Click here).
Result Result
Proceed to
CAN communication DTC is not output
A
CAN communication system (for LHD) DTC is output
B
CAN communication system (for RHD) DTC is output
C
|
|
||||
|
|
||||
| A | |
| 2. CHECK ANTI-LOCK BRAKE SYSTEM (VEHICLE SPEED) |
Check for DTCs (Click here).
|
|
||||
| OK | |
| 3. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (SPEEDOMETER) |
Operate the intelligent tester according to the display and select Active Test (Click here).
Combination Meter Tester Display
Test Part
Control Range
Diagnostic Note
Speed Meter Operation
Speedometer
0, 40, 80, 120, 160, 200, 240 or 280
Perform the test with the vehicle stopped and engine idling.
- HINT:
- Make sure that the vehicle is stopped and the engine is idling. The doors will be locked automatically when performing the speedometer Active Test. This is a normal function.
- The displayed value has the same units (km/h, mph) as the main scale of the vehicle speedometer.
- The needle position should be within the acceptable tolerance.
- OK:
- Needle indication is normal.
- Make sure that the vehicle is stopped and the engine is idling. The doors will be locked automatically when performing the speedometer Active Test. This is a normal function.
| Result |
Proceed to |
| OK |
A |
| NG (w/ Multi-information Display) |
B |
| NG (w/o Multi-information Display) |
C |
|
|
||||
|
|
||||
| A | |
| 4. READ VALUE USING INTELLIGENT TESTER (VEHICLE SPEED) |
Operate the intelligent tester according to the display and select Data List (Click here).
Combination Meter Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
Vehicle Speed meter
Vehicle speed/Min.: 0 (0), Max.: 255 (158)
Almost same as actual speed (when driving)
Unit: km/h (mph)
- OK:
- Vehicle speed displayed on the intelligent tester is almost the same as actual vehicle speed measured using speedometer tester (calibrated chassis dynamometer).
Result Result
Proceed to
NG
A
OK (w/ Multi-information Display)
B
OK (w/o Multi-information Display)
C
|
|
||||
|
|
||||
| A | |
| 5. READ VALUE USING INTELLIGENT TESTER (WHEEL SPEED SENSOR) |
Operate the intelligent tester according to the display and select Data List (Click here).
ABS/VSC/TRAC Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
FR Wheel Speed
Wheel speed sensor FR reading/Min.: 0 (0), Max.: 326 (202)
Actual wheel speed
A similar speed is indicated on the speedometer.
FL Wheel Speed
Wheel speed sensor FL reading/Min.: 0 (0), Max.: 326 (202)
Actual wheel speed
A similar speed is indicated on the speedometer.
RR Wheel Speed
Wheel speed sensor RR reading/Min.: 0 (0), Max.: 326 (202)
Actual wheel speed
A similar speed is indicated on the speedometer.
RL Wheel Speed
Wheel speed sensor RL reading/Min.: 0 (0), Max.: 326 (202)
Actual wheel speed
A similar speed is indicated on the speedometer.
- OK:
- Vehicle speed displayed on the intelligent tester is almost the same as actual vehicle speed measured using speedometer tester (calibrated chassis dynamometer).
Result Result
Proceed to
NG (for LHD)
A
NG (for RHD)
B
OK (w/ Multi-information Display)
C
OK (w/o Multi-information Display)
D
|
|
||||
|
|
||||
|
|
||||
| A | ||
| ||
