Tachometer Malfunction
Circuit diagnosis · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
The combination meter receives engine speed signals from the ECM via the CAN line. The combination meter displays engine speed data that is calculated based on the data received from the ECM.WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK CAN COMMUNICATION SYSTEM |
Check for DTCs (Click here).
Result Result
Proceed to
CAN communication system DTC is not output
A
CAN communication system (for LHD) DTC is output
B
CAN communication system (for RHD) DTC is output
C
|
|
||||
|
|
||||
| A | |
| 2. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (TACHOMETER) |
Operate the intelligent tester according to the display and select Active Test (Click here).
Combination Meter Tester Display
Test Part
Control Range
Diagnostic Note
TachoMeter Operation
Tachometer
0, 1000, 2000, 3000, 4000, 5000, 6000, 7000
Perform the test with the vehicle stopped and engine idling.
- HINT:
- Make sure that the vehicle is stopped and the engine is idling.
- OK:
- Needle indication is normal.
Result Result
Proceed to
OK
A
NG (w/ Multi-information Display)
B
NG (w/o Multi-information Display)
C
|
|
||||
|
|
||||
| A | |
| 3. READ VALUE USING INTELLIGENT TESTER (TACHOMETER) |
Operate the intelligent tester according to the display and select Data List (Click here).
Combination Meter Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
Engine Rpm
Engine speed/Min.: 0, Max.: 12750
Idling: 700 to 800
Unit: rpm
- OK:
- Engine speed displayed on the intelligent tester is almost the same as actual engine speed.
Result Result
Proceed to
NG
A
OK (w/ Multi-information Display)
B
OK (w/o Multi-information Display)
C
|
|
||||
|
|
||||
| A | |
| 4. READ VALUE USING INTELLIGENT TESTER (ENGINE SPEED) |
Operate the intelligent tester according to the display and select Data List (Click here).
Result Result
Proceed to
Engine speed displayed on the intelligent tester is almost same as actual engine speed
A
Engine speed displayed on the intelligent tester is not same as actual engine speed (for 1GR-FE)
B
Engine speed displayed on the intelligent tester is not same as actual engine speed (for 1UR-FE)
C
Engine speed displayed on the intelligent tester is not same as actual engine speed (for 3UR-FE)
D
Engine speed displayed on the intelligent tester is not same as actual engine speed (for 1VD-FTV)
E
- OK:
- Engine speed displayed on the intelligent tester is almost the same as actual engine speed.
|
|
||||
|
|
||||
|
|
||||
|
|
||||
| A | |
| 5. CHECK COMBINATION METER ASSEMBLY |
Check the combination meter type.
| Result |
Proceed to |
| w/ Multi-information Display |
A |
| w/o Multi-information Display |
B |
|
|
||||
| A | ||
| ||
