Fuel Receiver Gauge Malfunction
Circuit diagnosis · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
The fuel sender gauge has a variable resistance mechanism. The resistance decreases when the fuel amount increases, and the resistance increases when the fuel amount decreases. The fuel receiver gauge changes based on the resistance of the fuel sender gauge.WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK FOR DTC |
Check for DTCs (Click here).
Result Result
Proceed to
DTC B1500 or B1501 is not output
A
DTC B1500 is output
B
DTC B1501 is output
C
|
|
||||
|
|
||||
| A | |
| 2. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (FUEL RECEIVER GAUGE ASSEMBLY) |
Operate the intelligent tester according to the steps on the display and select Active Test (Click here).
Combination Meter Tester Display
Test Part
Control Range
Diagnostic Note
Fuel Meter Operation
Fuel receiver gauge
EMPTY, 1/2 or FULL
Perform the test with the vehicle stopped and engine idling.
- OK:
- Needle indication is normal.
Result Result
Proceed to
OK
A
NG (w/ Multi-information Display)
B
NG (w/o Multi-information Display)
C
|
|
||||
|
|
||||
| A | ||
| ||
