SYSTEM DESCRIPTION
Troubleshooting · Vehicles built Sep 2011 – Dec 2011
| GENERAL |
This system has a rear television camera assembly mounted on the back door to display the rear view of the vehicle on the display and navigation module display. The display panel also shows a composite view consisting of the area behind the vehicle and parking guidelines to assist the driver in parking the vehicle by monitoring the area behind the vehicle.
This system consists of the following components:
Parking assist ECU
Rear television camera assembly
Display and navigation module display
Steering control ECU
Steering angle sensor
Skid Control ECU
This system is equipped with a self-diagnosis system, which is operated on a designated window that appears on the display panel, just as in the navigation system.
| FUNCTION OF COMPONENTS |
The parking assist ECU controls the system by using information from the following components.
Item
Function
Rear Television Camera
- Mounted on the back door to transmit the rear view of the vehicle to the parking assist ECU.
- Has a color video camera that uses a CCD (Charge Coupled Device) and a wide-angle lens.
Parking Assist ECU
- Transmits video signals, which contain a composite consisting of the rear view of the vehicle taken with the television camera and parking assist guidelines, to the display and navigation module display.
- Performs overall control of the system by receiving signals from the sensors and display and navigation module display.
Display and navigation module display
Receives the video signals containing a composite of the rear view of the vehicle and parking assist guideline signals from the parking assist ECU, and displays them on the display panel.
Steering angle sensor
Detects the angle of the steering wheel and sends the resulting signals to the parking assist ECU through CAN communication.
Park/neutral position switch
Sends the shift position signal to the ECM.
Steering control ECU
Receives the variable gear ratio steering signal from the steering angle sensor.
Skid control ECU
Transmits a vehicle speed signal to the parking assist ECU.
- Mounted on the back door to transmit the rear view of the vehicle to the parking assist ECU.
| OPERATION EXPLANATION |
The reverse position signal is sent from the shift lever position switch to the parking assist ECU when the shift lever is moved to R.
In parallel parking assist mode, an appropriate steering angle and timing information can be provided for the driver. This is based on the information from the steering angle sensor signal and the vehicle angle data signal that are sent to the parking assist ECU.
- HINT:
- The steering angle sensor signal is used to control parking assist for only estimated guide line mode.
| DISPLAY MODE SETTING |


While the parking assist monitor is displayed, pressing the line mode button switches the parking assist monitor display mode.
Parking Assist Monitor Display Mode Parking Assist Monitor Display Mode
Distance Guide Line
(Red with Black)
Vehicle Width Extension Line
(Green)
Predicted Path Line
(Yellow)
Parking Guide Line
(Green)
Estimated Guide Line Mode
Displayed
Displayed
Displayed
Not displayed
Parking Guide Line Mode
Displayed
Displayed
Not displayed
Displayed
Guide Line Deletion Mode
Displayed
Not displayed
Not displayed
Not displayed
| COMMUNICATION SYSTEM OUTLINE |
The components of the parking assist monitor system communicate with each other through the AVC-LAN. Also, parallel parking assist mode judges the vehicle angle data transmitted via the AVC-LAN from the display and navigation module display (the data is calculated by the display and navigation module display by integrating the yaw rate of the gyro sensor built into the display and navigation module display).
If a short circuit or open circuit occurs in the AVC-LAN, communication is interrupted and the parking assist monitor system will stop functioning.
| DIAGNOSTIC FUNCTION OUTLINE |
This parking assist monitor system has a diagnostic function displayed in the display and navigation module display. This function enables the calibration (adjustment and verify) of the parking assist monitor system (Click here).
The parking assist monitor system can check the following items by using the intelligent tester.
Item
Proceed to
DTC
Click here
Data List / Active Test
Click here