C1787 Forward/Rearward/Sideways G Sensor Communication Error
Diagnostic trouble codes · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
The suspension control ECU receives signals from the yaw rate sensor via CAN communication.| DTC Code |
Detection Condition |
Trouble Area |
| C1787 |
While the engine switch is on (IG), the yaw rate sensor malfunction signal is detected for 1 second or more. |
|
INSPECTION PROCEDURE
- NOTICE:
- Before performing troubleshooting, inspect the connectors of related circuits.
- If the suspension control ECU or height control sensor is replaced, the vehicle height offset calibration must be performed (Click here).
- Before performing troubleshooting, inspect the connectors of related circuits.
| 1. CHECK DTC (VEHICLE STABILITY CONTROL SYSTEM) |
Check if a yaw rate sensor malfunction DTC is output under the vehicle stability control system (Click here).
Result Result
Proceed to
DTC is not output
A
DTC is output
B
|
|
||||
| A | |
| 2. CLEAR DTC |
Clear the DTCs (Click here).
| NEXT | |
| 3. CHECK DTC |
Check for DTCs.
Result Result
Proceed to
DTC C1787 is output
A
DTC C1787 is not output
B
|
|
||||
| A | ||
| ||
