2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedures for the LHD vehicle and RHD vehicle.
  2. The procedures listed below are for the LHD vehicle.


1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY
  1. Connect the connectors.

  1. E156897
    Insert the radio receiver and attach the 5 claws on its backside.

    NOTICE:
    When inserting the radio receiver, do not press the knobs on it.


2. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

B292996
  1. Connect the connectors.

  1. Attach the 7 claws to install the lower center instrument cluster finish panel sub-assembly.


3. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

B180005
  1. Attach the 7 claws to install the lower instrument panel pad sub-assembly.

  1. Install the clip and screw.


4. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

B182501
  1. Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.


5. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

B292995
  1. Connect the connectors and attach the 2 clamps.

  1. Attach the 8 claws to install the lower instrument panel pad sub-assembly.

  1. Install the clip and screw.


6. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

B292997
  1. Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.


7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
  1. w/ Cassette Tape Player:
    (Click here)

  1. w/o Multi-display:
    (Click here)


8. INSTALL NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL

B180653
  1. Connect the connector.

  1. Attach the 10 claws to install the No. 1 center instrument cluster finish panel.


9. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

B182866
  1. Connect the connector.

  1. Attach the 6 claws to install the No. 4 instrument panel register.


10. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

B182547
  1. Connect the connector.

  1. Attach the 6 claws to install the No. 3 instrument panel register.


11. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

B183763
  1. Attach the 8 claws to install the opening cover.


12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Sep 2011 – Dec 2011)PRECAUTION (from Sep 2011) →