INSTALLATION
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
| 1.
INSTALL DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY |
 |
Install the double lock door control relay assembly with the bolt.
Connect the connector.
| 2.
INSTALL STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column) |
 |
(Click here)
| 3.
INSTALL STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column) |
 |
(Click here)
| 4.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 5.
CHECK SRS WARNING LIGHT |
 |
(Click here)