2011-2013 Land Cruiser · Service Manual Vehicle Interior

Cooling Box Blower Motor Circuit

Circuit diagnosis · Vehicles built from Sep 2011

DESCRIPTION

The cooler blower motor is operated by signals from the air conditioning amplifier assembly (for cool box).

WIRING DIAGRAM

E160120E02

INSPECTION PROCEDURE


1. INSPECT FUSE (A/C IG)
  1. Remove the A/C IG fuse from the cowl side junction block LH.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A/C IG fuse
    Always
    Below 1 Ω



NG
REPLACE FUSE
OK


2. CHECK HARNESS AND CONNECTOR (NO. 1 COOLER WIRING HARNESS - BATTERY)

  1. E158385E16
    Disconnect the No. 1 cooler wiring harness sub-assembly connector.

  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - Body ground
    Engine switch off
    Below 1 V
    Engine switch on (IG)
    11 to 14 V



NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


3. CHECK HARNESS AND CONNECTOR (NO. 1 COOLER WIRING HARNESS - BODY GROUND)

  1. E158385E17
    Disconnect the No. 1 cooler wiring harness sub-assembly connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    6 (L) - Body ground
    Always
    Below 1 Ω



NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


4. CHECK NO. 1 COOLER WIRING HARNESS SUB-ASSEMBLY (OPERATION)
  1. Replace the No. 1 cooler wiring harness sub-assembly with a normal one and check that the condition returns to normal.

    OK:
    Same problem does not occur.



NG
Go to step 5
OK

REPLACE NO. 1 COOLER WIRING HARNESS SUB-ASSEMBLY

5. INSPECT COOLER BLOWER MOTOR

  1. E158421E01
    Remove the cooler blower motor (Click here).

  1. Connect the positive (+) lead from the battery to terminal 1 and negative (-) to terminal 2, then check that the motor operates smoothly.

    OK:
    Cooler blower motor operates smoothly.



NG
REPLACE COOLER BLOWER MOTOR (Click here)
OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY (for Cool Box) (Click here)


← Cooling Box Magnetic Valve Circuit (from Sep 2011)Cooling Box Control Switch Circuit (from Sep 2011) →