Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › THROTTLE BODY
RM2660E _51 Engine / Hybrid System _052774 1GR-FE ENGINE CONTROL _0255012 THROTTLE BODY A

1GR-FE ENGINE CONTROL  THROTTLE BODY  REMOVAL  


PROCEDURE

Hide 53806 1.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 2.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 22030 7.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A075597

Disconnect the No. 5 water by-pass hose.


b.
A075598

Disconnect the No. 4 water by-pass hose.


c.
A075599

Disconnect the throttle position sensor and throttle control motor connector.


d.

Remove the 4 bolts, the throttle body with motor, and the gasket.