Home › Engine / Hybrid System › 3UR-FE (ENGINE CONTROL) › THROTTLE BODY
RM2660E _51 Engine / Hybrid System _052775 3UR-FE ENGINE CONTROL _0255019 THROTTLE BODY A

3UR-FE ENGINE CONTROL  THROTTLE BODY  REMOVAL  


PROCEDURE

Hide 53806 1.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 2.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 22030 7.REMOVE THROTTLE BODY ASSEMBLY

a.
A238823

Disconnect the 2 water by-pass hoses.


b.

Disconnect the throttle position sensor and control motor connector.


c.
A158613

Remove the 4 bolts, throttle body and gasket.


d.

Remove the 2 water by-pass hoses from the throttle body.