Home › Engine / Hybrid System › 1UR-FE (ENGINE MECHANICAL) › REAR CRANKSHAFT OIL SEAL
RM2660E _51 Engine / Hybrid System _052776 1UR-FE ENGINE MECHANICAL _0255038 REAR CRANKSHAFT OIL SEAL A

1UR-FE ENGINE MECHANICAL  REAR CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 32101 2.REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

Hide 11381A 3.REMOVE REAR CRANKSHAFT OIL SEAL

a.
A228391E03
1,2.052 0.896,2.052 0.896,2.052 0.583,1.521 true 1.177,0.688 1.271,0.688 1.271,0.688 1.51,1.01 true 1.021,1.948 1.302,2.177 0.281,0.229 10 true *2 0.969,0.604 1.156,0.823 0.188,0.219 10 true *1

Using a knife, cut off the lip of the rear crankshaft oil seal.

Text in Illustration
*1 Protective Tape
*2 Cut Position


b.

Using a screwdriver, pry out the rear crankshaft oil seal.

NOTICE:

Do not damage the surface of the rear crankshaft oil seal press fit hole or crankshaft.


HINT:

Tape the screwdriver tip before use.