Home › Engine / Hybrid System › 1UR-FE (ENGINE MECHANICAL) › ENGINE UNIT
RM2660E _51 Engine / Hybrid System _052776 1UR-FE ENGINE MECHANICAL _0255040 ENGINE UNIT A

1UR-FE ENGINE MECHANICAL  ENGINE UNIT  REMOVAL  


PROCEDURE

Hide 1.REMOVE ENGINE WIRE

Hide 23902 3.REMOVE FUEL TUBE SUB-ASSEMBLY

Hide 25710 4.REMOVE AIR SWITCHING VALVE ASSEMBLY (w/ Secondary Air Injection System)

Hide 17364A 5.REMOVE NO. 4 AIR TUBE (w/ Secondary Air Injection System)

a.
A214892

Remove the bolt and No. 4 air tube.


Hide 17363Q 6.REMOVE NO. 3 AIR TUBE (w/ Secondary Air Injection System)

a.
A214893

Remove the bolt and No. 3 air tube.


Hide 16278K 7.REMOVE NO. 2 WATER BY-PASS PIPE

a.
A274163

Disconnect the hose and remove the 2 bolts and No. 2 water by-pass pipe.


Hide 16296 8.REMOVE NO. 8 WATER BY-PASS HOSE

A274164

Hide 16294 9.DISCONNECT NO. 11 WATER BY-PASS HOSE

A274165

Hide 16332 10.REMOVE NO. 1 WATER OUTLET PIPE

a.
A239696

Remove the 2 bolts and No. 1 water outlet pipe.


Hide 25635A 11.REMOVE NO. 1 EGR PIPE BRACKET

a.
A239697

Remove the 3 bolts and No. 1 EGR pipe bracket.


Hide 12311 12.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH

a.
A228368

Remove the 4 bolts and front No. 1 engine mounting bracket RH.


Hide 12315 13.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH

a.
A228367

Remove the 4 bolts and front No. 1 engine mounting bracket LH.


Hide 23807 14.REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY

Hide 23808 15.REMOVE NO. 2 FUEL DELIVERY PIPE SUB-ASSEMBLY

Hide 16268L 18.REMOVE NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY

Hide 16261G 19.REMOVE NO. 1 WATER BY-PASS HOSE

Hide 16603 21.REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY

Hide 12612A 24.REMOVE NO. 2 ENGINE COVER

A214852

Hide 12611 25.REMOVE NO. 1 ENGINE COVER

A214853

Hide 82121 26.REMOVE ENGINE WIRE

a.
A214595

Disconnect the 4 knock sensor connectors.


b.

Detach the 3 wire harness clamps.


c.

Remove the bolt and engine wire.


Hide 16294 27.REMOVE NO. 11 WATER BY-PASS HOSE

A214627

Hide 19500 28.REMOVE IGNITION COIL ASSEMBLY

a.

Remove the 8 bolts and 8 ignition coils.


Hide 86011Q 29.REMOVE NOISE FILTER

a.
A218875

for Bank 1:

Remove the bolt and noise filter from the cylinder head cover LH.


b.
A218876

for Bank 2:

Remove the bolt and noise filter from the cylinder head cover RH.