53806
1.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
53805
2.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
51405A
3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
11209
4.REMOVE V-BANK COVER SUB-ASSEMBLY
16361A
5.REMOVE FAN AND GENERATOR V BELT
While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then insert a bar of 5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.
| *1 | Bar |
The pulley bolt for the belt tensioner has a left-hand thread.
Remove the V belt.