17105
1.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY
13511
2.REMOVE CAMSHAFT
13801
3.REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY
13750
4.REMOVE VALVE LASH ADJUSTER ASSEMBLY
13716
5.REMOVE VALVE STEM CAP
11102
6.REMOVE CYLINDER HEAD SUB-ASSEMBLY LH
Uniformly loosen and remove the 2 bolts in the sequence shown in the illustration.
Using a 10 mm bi-hexagon wrench, uniformly loosen the 10 cylinder head bolts in the sequence shown in the illustration. Remove the 10 cylinder head bolts and plate washers.
Be careful not to drop washers into the cylinder head.
Head warpage or cracking could result from removing bolts in an incorrect order.
Be sure to arrange the removed parts for each installation position separately.
Remove the cylinder head and gasket.
11101
7.REMOVE CYLINDER HEAD SUB-ASSEMBLY RH
Uniformly loosen and remove the 2 bolts in the sequence shown in the illustration.
Using a 10 mm bi-hexagon wrench, uniformly loosen the 10 cylinder head bolts in the sequence shown in the illustration. Remove the 10 cylinder head bolts and plate washers.
Be careful not to drop washers into the cylinder head.
Head warpage or cracking could result from removing bolts in an incorrect order.
Be sure to arrange the removed parts for each installation position separately.
Remove the cylinder head and gasket.