Home › Engine / Hybrid System › 1GR-FE (EMISSION CONTROL) › AIR PUMP
RM2660E _51 Engine / Hybrid System _052784 1GR-FE EMISSION CONTROL _0255129 AIR PUMP A

1GR-FE EMISSION CONTROL  AIR PUMP  REMOVAL  


PROCEDURE

Hide 53805 1.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 53782 2.REMOVE FRONT FENDER APRON TRIM PACKING A

Hide 53875A 3.DISCONNECT FRONT FENDER LINER RH

a.
A218486

Remove the screw, and disconnect the liner from the front bumper cover.


b.

Using a T30 "TORX" socket, remove the 2 screws.


c.

Remove the 4 clips.


d.

Partially remove the fender liner.

HINT:

It is not necessary to fully remove the fender liner. Partially remove it so that the air pump can be removed.



Hide 17343 4.REMOVE NO. 3 AIR INJECTION SYSTEM HOSE

a.
A266118

Inside engine room:

i.

Slide the clip and disconnect the No. 3 air injection system hose from the air tube.


ii.

Detach the clamp and disconnect the No. 3 air injection system hose from the clamp.



b.
A266119

Inside front fender RH:

i.

Detach the clamp from the air pump bracket.


ii.

Slide the clip and remove the No. 3 air injection system hose.



Hide 17610C 5.REMOVE AIR PUMP ASSEMBLY

a.
A266120

Disconnect the connector.


b.

Detach the connector clamp from the bracket.


c.

Disconnect the wire harness from the clamp.


d.
A266121

Remove the 2 bolts, 2 nuts and air pump assembly.


Hide 17621A 6.REMOVE AIR PUMP INLET

a.
A273606

Remove the 2 bolts and air pump inlet.


Hide 17341 7.REMOVE NO. 1 AIR INJECTION SYSTEM HOSE

a.
A219186

Remove the No. 1 air injection system hose from the air pump assembly.


Hide 8.REMOVE AIR PUMP

a.
A218491

Detach the 2 clamps from the air pump bracket.


b.

Remove the 3 insulators from the air pump.