32917
1.REMOVE TRANSMISSION OIL COOLER AIR DUCT (w/ Air Cooled Transmission Oil Cooler)
52119A
2.REMOVE FRONT BUMPER COVER (w/o Air Cooled Transmission Oil Cooler)
for Standard:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Standard)>REMOVAL)
w/ Winch
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/ Winch)>REMOVAL)
51405A
3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/o Air Cooled Transmission Oil Cooler)
4.DRAIN ENGINE COOLANT
11259
5.REMOVE V-BANK COVER
53293C
6.REMOVE RADIATOR SIDE DEFLECTOR RH (w/o Air Cooled Transmission Oil Cooler)
Using a clip remover, remove the 4 clips and radiator side deflector RH.
53294C
7.REMOVE RADIATOR SIDE DEFLECTOR LH
Using a clip remover, remove the 4 clips and radiator side deflector LH.
16571C
8.REMOVE NO. 1 RADIATOR HOSE
16572D
9.REMOVE NO. 2 RADIATOR HOSE
Detach the clamp and remove the No. 2 radiator hose.
32907A
10.DISCONNECT OIL COOLER TUBE (w/ Air Cooled Transmission Oil Cooler)
Detach the claw to open the flexible hose clamp, and then remove the 2 bolts to disconnect the oil cooler tube from the fan shroud.
16711
11.REMOVE FAN SHROUD
Loosen the 4 nuts holding the fluid coupling fan.
Remove the fan and generator V-belt (See page Engine / Hybrid System>1GR-FE (ENGINE MECHANICAL)>DRIVE BELT>REMOVAL).
Disconnect the reservoir hose from the upper side of the radiator tank.
Remove the 2 bolts holding the fan shroud.
Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.
Be careful not to damage the radiator core.
Remove the fan pulley from the water pump.
32921D
12.DISCONNECT INLET OIL COOLER HOSE (for Automatic Transmission)
Disconnect the oil cooler hose.
32922A
13.DISCONNECT OUTLET OIL COOLER HOSE (for Automatic Transmission)
Disconnect the oil cooler hose.
16400
14.REMOVE RADIATOR ASSEMBLY
Remove the 4 bolts and radiator.