Home › Engine / Hybrid System › 3UR-FE (LUBRICATION) › OIL LEVEL SENSOR
RM2660E _51 Engine / Hybrid System _052796 3UR-FE LUBRICATION _0255207 OIL LEVEL SENSOR A

3UR-FE LUBRICATION  OIL LEVEL SENSOR  INSTALLATION  


PROCEDURE

Hide 89491 1.INSTALL ENGINE OIL LEVEL SENSOR

a.

Install a new gasket and the oil level sensor with the 4 bolts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


b.

Connect the oil level sensor connector.


Hide 51405A 7.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 53806 8.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 9.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH