Home › Engine / Hybrid System › 1UR-FE (LUBRICATION) › OIL LEVEL SENSOR
RM2660E _51 Engine / Hybrid System _052797 1UR-FE LUBRICATION _0255213 OIL LEVEL SENSOR A

1UR-FE LUBRICATION  OIL LEVEL SENSOR  INSTALLATION  


PROCEDURE

Hide 89491 1.INSTALL ENGINE OIL LEVEL SENSOR

a.

Install a new gasket to the engine oil level sensor.


b.

Install the engine oil level sensor with the 4 bolts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


c.

Connect the connector.


Hide 32907A 2.CONNECT OIL COOLER TUBE

a.

Connect the oil cooler tube with the 2 bolts.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


Hide 51442 6.INSTALL NO. 2 ENGINE UNDER COVER

a.

Install the No. 2 engine under cover with the 2 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


Hide 51405A 7.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 53806 8.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 9.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH