Home › Engine / Hybrid System › 1VD-FTV (LUBRICATION) › OIL LEVEL SENSOR
RM2660E _51 Engine / Hybrid System _052799 1VD-FTV LUBRICATION _0255223 OIL LEVEL SENSOR A

1VD-FTV LUBRICATION  OIL LEVEL SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEEL RH

Hide 53736G 2.REMOVE FRONT FENDER APRON SEAL FRONT RH

Hide 53738A 3.REMOVE FRONT FENDER APRON SEAL REAR RH

Hide 53806 4.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 5.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 51405A 6.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 32907A 9.DISCONNECT OIL COOLER TUBE (for Automatic Transmission)

a.
A182776

Remove the 3 bolts and disconnect the oil cooler tube from the engine.


Hide 89491 10.REMOVE ENGINE OIL LEVEL SENSOR

a.
A170283

Disconnect the sensor connector.


b.

Remove the 4 bolts and sensor.


c.

Remove the gasket from the sensor.