Home › Drivetrain › AB60F (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER(w/o Entry and Start System) › 2014.08–2015.08
RM2660E _52 Drivetrain _052805 AB60F AUTOMATIC TRANSMISSION / TRANSAXLE _0255266 SHIFT LEVER(w/o Entry and Start System) A

AB60F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER(w/o Entry and Start System)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

U164683E02
2.667,0.208 2.781,0.365 0.115,0.156 10 false 3 0.656,1.083 0.771,1.24 0.115,0.156 10 false 3 0.885,1.073 1,1.229 0.115,0.156 10 false 4 2.875,0.208 2.99,0.365 0.115,0.156 10 false 4 2.781,0.906 2.896,1.063 0.115,0.156 10 false 2 1,0.042 1.115,0.198 0.115,0.156 10 false 1

a.

Install the floor shift with the 4 bolts. Tighten the bolts in the order shown in the illustration.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


b.

Connect the 2 connectors.


Hide 33702B 2.CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

C172427E01
1.046,0.14 1.183,0.318 0.137,0.177 10 P 1.511,0.278 1.649,0.455 0.137,0.177 10 R 1.76,0 1.898,0.177 0.137,0.177 10 N

a.

Turn the control shaft lever RH of the park/neutral position switch counterclockwise until it stops, and then turn it clockwise 2 notches to set it to the N position.


b.

Move the shift lever to N.


c.
C172428E01
0.883,0.134 1.301,0.311 0.418,0.177 10 Lever 1.954,0.439 1.501,0.237 1.501,0.237 1.365,0.237 false

Temporarily install the floor shift gear shifting rod with the nut.


d.

Tighten the nut while lightly pushing the lever rearward.

Torque:
13 N*m (130 kgf*cm, 9 ft.*lbf)


Hide 3.INSTALL FRONT CONSOLE BOX (w/o Cool Box)