Home › Drivetrain › CLUTCH › CLUTCH UNIT(for 1VD-FTV)
RM2660E _52 Drivetrain _052808 CLUTCH _0255318 CLUTCH UNIT(for 1VD-FTV) A

CLUTCH  CLUTCH UNIT(for 1VD-FTV)  REMOVAL  


PROCEDURE

Hide 1.REMOVE MANUAL TRANSMISSION ASSEMBLY

Hide 31204 2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

C173316

a.

Remove the clutch release fork with the clutch release bearing from the transmission unit.


b.

Remove the release fork support from the transmission unit.


c.
C163036

Remove the clip and release bearing from the clutch release fork.


Hide 31210 3.REMOVE CLUTCH COVER ASSEMBLY

C173317E02
1.073,0.365 1.354,0.635 true 1.458,0.667 1.104,0.385 true 0.333,0.156 1.104,0.365 0.771,0.208 10 false Matchmark

a.

Put matchmarks on the clutch cover and flywheel.


b.

Loosen each set bolt one turn at a time until spring tension is released.


c.

Remove the 8 set bolts, and pull off the clutch cover.

NOTICE:

Do not drop the clutch disc.



Hide 31250 4.REMOVE CLUTCH DISC ASSEMBLY

NOTICE:

Keep the lining part of the clutch disc, pressure plate and surface of the flywheel away from oil and foreign matter.


Hide 33311W 5.INSPECT INPUT SHAFT BEARING