Home › Drivetrain › H150F (MANUAL TRANSMISSION / TRANSAXLE) › TRANSMISSION CASE OIL SEAL
RM2660E _52 Drivetrain _052809 H150F MANUAL TRANSMISSION / TRANSAXLE _0255325 TRANSMISSION CASE OIL SEAL A

H150F MANUAL TRANSMISSION / TRANSAXLE  TRANSMISSION CASE OIL SEAL  REPLACEMENT  


PROCEDURE

Hide 1.REMOVE MANUAL TRANSMISSION ASSEMBLY

Hide 33131 2.REMOVE FRONT BEARING RETAINER (MTM)

C171381

a.

Remove the 8 bolts and front bearing retainer.


Hide 33131A 3.REMOVE TRANSMISSION FRONT BEARING RETAINER OIL SEAL

C171295

a.

Using a screwdriver, pry out the oil seal.

NOTICE:

Be careful not to damage the oil seal and front bearing retainer contact surfaces.


HINT:

Tape the screwdriver tip before use.



Hide 33131A 4.INSTALL TRANSMISSION FRONT BEARING RETAINER OIL SEAL

C171296E01
2.753,0.689 3.210,0.882 0.457,0.193 10 SST 2.309,1.24 2.711,0.796 false 2.711,0.796 2.256,0.952 false

a.

Using SST and a press, drive in a new oil seal.

SST
09950-60010  (09951-00460)
09950-70010  (09951-07150)

Standard Drive in Depth:

15.4 to 16.2 mm (0.607 to 0.637 in.)



b.

Apply gear oil to the lip of the oil seal.


Hide 33131 5.INSTALL FRONT BEARING RETAINER (MTM)

C171194E03
2.281,1.021 2.615,1.021 false 2.646,0.948 3.208,1.313 0.563,0.365 10 false Seal Packing

a.

Apply seal packing to the front bearing retainer, as shown in the illustration.

Seal Packing:

Toyota Genuine Seal Packing 1281, Three Bond 1281 or equivalent


NOTICE:

Parts must be assembled within 10 minutes of application. Otherwise, the packing (FIPG) material must be removed and reapplied.



b.

Apply adhesive to 2 or 3 threads of the bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



c.
C171381

Install the front bearing retainer with the 8 bolts.

Torque:
17 N*m (170 kgf*cm, 12 ft.*lbf)


Hide 6.INSTALL MANUAL TRANSMISSION ASSEMBLY