Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT PROPELLER SHAFT ASSEMBLY
RM2660E _52 Drivetrain _052811 DRIVE SHAFT / PROPELLER SHAFT _0255346 FRONT PROPELLER SHAFT ASSEMBLY A

DRIVE SHAFT / PROPELLER SHAFT  FRONT PROPELLER SHAFT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 37140 1.INSTALL FRONT PROPELLER SHAFT ASSEMBLY

NOTICE:

Refer to the components illustration for the installation direction of the propeller shaft.


a.
C172296E01
2.17,1.376 2.393,1.711 2.393,1.711 2.465,1.709 false 2.509,1.63 3.264,1.794 0.755,0.165 10 Matchmark

Align the matchmarks on the propeller shaft flange and differential.


b.

Connect the propeller shaft with the 4 washers and 4 nuts.

Torque:
88 N*m (900 kgf*cm, 65 ft.*lbf)


c.
C172295E07
1.813,1.573 1.958,1.865 1.958,1.865 2.073,1.865 true 2.125,1.792 3.385,2.167 1.26,0.375 10 true Matchmark

Align the matchmarks on the propeller shaft flange and transfer flange.


d.

Install the propeller shaft with the 4 washers and 4 nuts.

Torque:
88 N*m (900 kgf*cm, 65 ft.*lbf)


Hide 37117 2.INSTALL PROPELLER SHAFT HEAT INSULATOR (w/ Heat Insulator)

a.
C172294

Install the insulator with the 2 bolts.

Torque:
16 N*m (160 kgf*cm, 12 ft.*lbf)


Hide 51405C 4.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 53806 5.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 6.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH