Home › Drivetrain › AXLE AND DIFFERENTIAL › FRONT DIFFERENTIAL CARRIER ASSEMBLY
RM2660E _52 Drivetrain _052812 AXLE AND DIFFERENTIAL _0255357 FRONT DIFFERENTIAL CARRIER ASSEMBLY A

AXLE AND DIFFERENTIAL  FRONT DIFFERENTIAL CARRIER ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 41110F 1.INSTALL FRONT DIFFERENTIAL CARRIER ASSEMBLY

a.
U156125E04
0.958,0.094 1.125,0.26 0.167,0.167 10 true C 2.573,0.073 2.781,0.24 0.208,0.167 10 false D 2.656,1.5 2.865,1.667 0.208,0.167 10 false A 3.021,1.375 3.229,1.542 0.208,0.167 10 false B 0.76,0.771 0.917,1.01 0.156,0.24 10 true E 0.875,1.094 1.125,1.354 0.25,0.26 10 true F 2.198,1.802 2.552,1.958 0.354,0.156 10 true NUT

Install the differential support assembly with bolts E and F.

Torque:
100 N*m (1020 kgf*cm, 74 ft.*lbf)


b.

Using a jack, slowly raise the front differential carrier assembly to its installation position.


c.

Temporarily install the front differential support assembly with bolts A and B and the nut.


d.

Temporarily install the bolts C and D.


e.

Tighten bolt A.

Torque:
120 N*m (1224 kgf*cm, 89 ft.*lbf)


f.

Tighten bolt B and the nut.

Torque:
120 N*m (1224 kgf*cm, 89 ft.*lbf)


g.

Tighten bolts C and D.

Torque:
120 N*m (1224 kgf*cm, 89 ft.*lbf)


h.

Connect the breather tube to the front differential union.


Hide 51602A 2.INSTALL FRONT SUSPENSION REBOUND STOPPER SUB-ASSEMBLY LH

a.
C174597

Install the suspension rebound stopper LH with the 3 bolts.

Torque:
58 N*m (591 kgf*cm, 43 ft.*lbf)


Hide 51601A 3.INSTALL FRONT SUSPENSION REBOUND STOPPER SUB-ASSEMBLY RH

a.
C174598

Install the suspension rebound stopper RH with the 3 bolts.

Torque:
58 N*m (591 kgf*cm, 43 ft.*lbf)


Hide 43420 4.INSTALL FRONT DRIVE SHAFT ASSEMBLY LH

Hide 43410 5.INSTALL FRONT DRIVE SHAFT ASSEMBLY RH

HINT:

Use the same procedure as the LH side.


Hide 37140 6.INSTALL FRONT PROPELLER SHAFT ASSEMBLY