Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ANTI-LOCK BRAKE SYSTEM › 2014.08–2015.08
RM2660E _54 Brake _052819 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0255416 ANTI-LOCK BRAKE SYSTEM D

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ANTI-LOCK BRAKE SYSTEM  DIAGNOSIS SYSTEM  


WARNING LIGHT CHECK


a.

Release the parking brake lever.

NOTICE:

When releasing the parking brake, set chocks to hold the vehicle for safety.


HINT:

When the parking brake is applied or the level of the brake fluid is low, the brake warning light comes on.



b.

When the ignition switch is turned to ON, check that the ABS and brake warning lights turn on and then turn off after the engine starts.

If a light remains on, proceed to troubleshooting for the light circuit below.

Trouble Area See Procedure
ABS warning light circuit (Click here)
Brake warning light circuit (Click here)