The power steering ECU receives engine speed signals from the ECM via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the engine speed signal.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1544 | An abnormal engine speed signal is received. | ·
ECD system ·
CAN communication system ·
Power steering ECU assembly |
Check if DTC U0100 is output (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM(for 1VD-FTV with DPF)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC U0100 is not output. | A |
| DTC U0100 is output. | B |
DTC U0100 indicates a CAN communication malfunction in the power steering system.
A
B
Using the GTS, check for DTCs and confirm that there are no problems in the ECD system (See page Engine / Hybrid System>1VD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ DPF)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is not output. | A |
| DTC is output. | B |
A
B
(See pageEngine / Hybrid System>1VD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ DPF)>DIAGNOSTIC TROUBLE CODE CHART)