Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM(for 1VD-FTV with DPF) › 2014.08–2015.08
RM2660E _55 Steering _052824 POWER ASSIST SYSTEMS _0255443 POWER STEERING SYSTEM(for 1VD-FTV with DPF) C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM(for 1VD-FTV with DPF)  C15F1  Steering Angle Sensor Circuit  


DESCRIPTION

The power steering ECU receives steering angle signals from the steering angle sensor via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the steering angle signal.

DTC Code DTC Detection Condition Trouble Area
C15F1 An abnormal steering angle signal is received.
·

Steering angle sensor

·

CAN communication system

·

Power steering ECU assembly



PROCEDURE

1.CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)
a.

Check if DTC U0126 is output (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM(for 1VD-FTV with DPF)>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC U0126 is not output. A
DTC U0126 is output. B

HINT:

DTC U0126 indicates a CAN communication malfunction in the power steering system.




A

2.CHECK OTHER DTC OUTPUT (VEHICLE STABILITY CONTROL SYSTEM)

B

2.CHECK OTHER DTC OUTPUT (VEHICLE STABILITY CONTROL SYSTEM)
a.

Using the GTS, check for DTCs related to the steering angle sensor and confirm that there are no problems in the vehicle stability control system (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC is not output. A
DTC is output. B



A

B

REPAIR OR REPLACE CIRCUIT INDICATED BY OUTPUT CODE (STEERING ANGLE SENSOR CIRCUIT)