Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve) › from 2015.08
RM2660E _55 Steering _052824 POWER ASSIST SYSTEMS _0255447 POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve) C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve)  C1541  Vehicle Speed Signal Malfunction  


DESCRIPTION

The power steering ECU receives vehicle speed signals from the skid control ECU via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the vehicle speed signal.

DTC Code DTC Detection Condition Trouble Area
C1541 An abnormal vehicle speed signal is received.
·

Speed sensor circuit

·

Vehicle stability control system

·

CAN communication system

·

Power steering ECU assembly



PROCEDURE

1.CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)
a.

Check if DTC U0129 is output (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve)>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC U0129 is not output. A
DTC U0129 is output. B

HINT:

DTC U0129 indicates a CAN communication malfunction in the power steering system.




A

2.CHECK OTHER DTC OUTPUT (VEHICLE STABILITY CONTROL SYSTEM)

B

2.CHECK OTHER DTC OUTPUT (VEHICLE STABILITY CONTROL SYSTEM)
a.

Using the GTS, check for DTCs and confirm that there are no problems in the vehicle stability control system (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC is not output. A
DTC is output. B



A

B

GO TO VEHICLE STABILITY CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)