Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve) › from 2015.08
RM2660E _55 Steering _052824 POWER ASSIST SYSTEMS _0255447 POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve) C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve)  C1544  High Engine Revolution Signal  


DESCRIPTION

The power steering ECU receives engine speed signals from the ECM via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the engine speed signal.

DTC Code DTC Detection Condition Trouble Area
C1544 An abnormal engine speed signal is received.
·

SFI system

·

ECD system

·

CAN communication system

·

Power steering ECU assembly



PROCEDURE

1.CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)
a.

Check if DTC U0100 is output (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve)>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC U0100 is not output. A
DTC U0100 is output. B

HINT:

DTC U0100 indicates a CAN communication malfunction in the power steering system.




A

2.CHECK OTHER DTC OUTPUT (SFI SYSTEM, ECD SYSTEM)

B

2.CHECK OTHER DTC OUTPUT (SFI SYSTEM, ECD SYSTEM)
a.

Using the GTS, check for DTCs and confirm that there are no problems in the SFI system or ECD system.

for 1UR-FE:

Refer to the following procedures (See page Engine / Hybrid System>1UR-FE (ENGINE CONTROL)>SFI SYSTEM>DTC CHECK / CLEAR).

for 1VD-FTV (w/ DPF):

Refer to the following procedures (See page Engine / Hybrid System>1VD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ DPF)>DTC CHECK / CLEAR).

for 1VD-FTV (w/o DPF):

Refer to the following procedures (See page Engine / Hybrid System>1VD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/o DPF)>DTC CHECK / CLEAR).


Result
Result Proceed to
DTC is not output. A
DTC is output. for 1UR-FE B
for 3UR-FE C
for 1VD-FTV (w/ DPF) D
for 1VD-FTV (w/o DPF) E



A

B

GO TO SFI SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)

C

D

E