The power steering ECU receives steering signals from the steering sensor via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the steering angle signal.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C15F1 | An abnormal steering angle signal is received. | ·
Steering sensor ·
CAN communication system ·
Power steering ECU assembly |
Check if DTC U0126 is output (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC U0126 is not output. | A |
| DTC U0126 is output. | B |
DTC U0126 indicates a CAN communication malfunction in the power steering system.
A
B
(See pageSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve)>U0100)
Using the GTS, check for DTCs related to the steering sensor and confirm that there are no problems in the vehicle stability control system (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is not output. | A |
| DTC is output. | B |
A
(See pageSteering>POWER ASSIST SYSTEMS>POWER STEERING ECU (w/ Variable Flow Control Solenoid Valve)>REMOVAL)
B