Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve) › from 2015.08
RM2660E _55 Steering _052824 POWER ASSIST SYSTEMS _0255447 POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve) C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve)  C15F2  VGRS System Malfunction  


DESCRIPTION

The power steering ECU receives VGRS relative angle signal from the steering control ECU via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the VGRS relative angle signal.

DTC Code DTC Detection Condition Trouble Area
C15F2 An abnormal VGRS relative angle signal is received.
·

Variable gear ratio steering system

·

CAN communication system

·

Power steering ECU assembly



PROCEDURE

1.CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)
a.

Check if DTC U0130 is output (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM(w/ Variable Flow Control Solenoid Valve)>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC U0130 is not output. A
DTC U0130 is output. B

HINT:

DTC U0130 indicates a CAN communication malfunction in the power steering system.




A

2.CHECK OTHER DTC OUTPUT (VARIABLE GEAR RATIO STEERING SYSTEM)

B

2.CHECK OTHER DTC OUTPUT (VARIABLE GEAR RATIO STEERING SYSTEM)
a.

Using the GTS, check for DTCs and confirm that there are no problems in the variable gear ratio steering system (See page Steering>VARIABLE GEAR RATIO STEERING>VARIABLE GEAR RATIO STEERING SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC is not output. A
DTC is output. B



A

B

GO TO VARIABLE GEAR RATIO STEERING SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)