Home › Steering › STEERING COLUMN › MULTIPLEX TILT AND TELESCOPIC ECU › 2014.08–2015.08
RM2660E _55 Steering _052826 STEERING COLUMN _0255457 MULTIPLEX TILT AND TELESCOPIC ECU A

STEERING COLUMN  MULTIPLEX TILT AND TELESCOPIC ECU  INSTALLATION  


PROCEDURE

Hide 89227 1.INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

C172655

a.

Install the ECU with the 2 screws.

Torque:
1.5 N*m (15 kgf*cm, 13 in.*lbf)


b.

Connect the 2 connectors.

NOTICE:

The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.



Hide 45810 3.INSTALL STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR)

HINT:

Refer to the instructions for installation of the steering column assembly (See page Steering>STEERING COLUMN>STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column)>INSTALLATION).