Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER (w/ Multi-display) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255464 RADIO RECEIVER(w/ Multi-display) A

AUDIO / VIDEO  RADIO RECEIVER(w/ Multi-display)  INSTALLATION  


PROCEDURE

Hide 86212 1.INSTALL NO. 2 RADIO BRACKET

a.

Install the No. 2 radio bracket with the 3 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 86211 2.INSTALL NO. 1 RADIO BRACKET

a.

Install the No. 1 radio bracket with the 3 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 86130A 3.INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET

a.

Connect the connectors.


b.

Insert the multi-media module receiver assembly to attach the 5 claws on its backside.

NOTICE:

When inserting the multi-media module receiver assembly, do not press the knobs on it.



c.
E336726E01
0.573,0.104 0.726,0.280 0.152,0.177 10 A 2.754,0.131 2.907,0.307 0.152,0.177 10 A

Install the multi-media module receiver assembly with the 2 screws and 2 bolts.

Torque:
Bolt A : 8.5 N*m (87 kgf*cm, 75 ft.*lbf)


Hide 55680A 5.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55670 6.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55510F 7.INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

Hide 55406B 8.INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Hide 55402C 9.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

Hide 55448A 10.INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

Hide 55403C 11.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

Hide 55449C 12.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

Hide 13.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).